PicoScope 6000 Oscilloscope Accessories
The following accessories may be used with the PicoScope 6000 Series of oscilloscopes.
500 MHz Oscilloscope Probe x10
Cable length: 1.3 m (approx 1 ft 3 in)
Compensated to ensure optimum performance when used with the PicoScope 6000 Series, this 500 MHz passive scope probe features x10 attenuation and a maximum working voltage of 300 volts RMS.
The compact design of this high-performance probe means there is only 2.5 mm housing diameter at the probe tip - compared to the conventional 5 mm housing - making it easier for you to see the device under test, and making it ideal for measurements of SMT components.
Model |
Bandwidth |
Attenuation |
Input resistance |
Input capacitance |
Maximum working voltage |
Price |
TA101 |
500 MHz |
x10 |
1 MΩ |
< 9.5 pF |
300 V RMS CATII |
$206.25* |
Accessories and spares for the TA101 oscilloscope probe
Item |
TA065 advanced accessory kit |
TA066 basic accessory kit |
TA067 standard accessory kit |
Coding rings (set) 3x4 colours |
1 |
|
|
Ground blade 2.5 |
1 |
|
|
Ground lead 15 cm |
1 |
1 |
1 |
Ground spring 2.5 |
1 |
|
|
IC-Cap 2.5 0.5 mm pitch; green |
1 |
|
|
IC-Cap 2.5 0.65 mm pitch; blue |
1 |
|
|
IC Cap 2.5 0.8 mm pitch; grey |
1 |
|
|
IC Cap 2.5 1.0 mm pitch; brown |
1 |
|
|
IC Cap 2.5 1.27 mm pitch; black |
1 |
|
|
Insulating cap 2.5 |
1 |
|
1 |
PCB adapter kit 2.5 |
1 |
|
|
Self-adhesive Cu pad 2 x 2 cm |
2 |
|
|
Solid tip CuBe 0.5 mm |
1 |
1 |
1 |
Spring tip gold plated 0.5 mm |
1 |
1 |
1 |
Sprung hook 2.5 |
1 |
1 |
1 |
Price |
$65.34* |
$20.79* |
$34.81* |
Active Differential Oscilloscope Probes
Our active differential probes let you use a conventional earthed oscilloscope to measure signals that are not referenced to ground, including mains voltages. They can also be used to measure and observe the waveforms of three-phase supplies or the gate and control signals of semiconductor circuits. They are ideal for investigating motor speed controls, uninterruptible power supplies, switch mode power supplies and process controllers.
Model |
Bandwidth |
Attenuation |
Differential voltage range |
Common mode voltage range |
Input impedance |
Price |
TA041 |
25 MHz |
x10 / x100 |
±70 V / ±700 V |
±1400 V |
4 MΩ / 5.5 pF |
$321.75* |
TA057 |
25 MHz |
x20 / x200 |
±140 V / ±1400 V |
±1400 V |
4 MΩ / 5.5 pF |
$363.00* |
TA058 |
50 MHz |
x10 |
±70 V |
±700 V |
1.6 MΩ / 7 pF |
$404.25* |
TA044 |
70 MHz |
x100 / x1000 |
±700 V / ±7000 V |
±7000 V |
10 MΩ / 10 pF |
$792.00* |
TA043 |
100 MHz |
x10 / x100 |
±70 V / ±700 V |
±700 V |
4 MΩ / 7 pF |
$742.50* |
TA042 |
100 MHz |
x100 / x1000 |
±140 V / ±1400 V |
±1400 V |
4 MΩ / 7 pF |
$544.50* |
TA045 |
200 MHz |
x10 |
±60 V |
±20 V |
500 kΩ / 7 pF |
$990.00* |
TA046 |
800 MHz |
x10 |
±15 V |
±30 V |
100 kΩ / 2 pF |
$1320.00* |
BNC Attenuator Set
The TA050 attenuator set consists of four coaxial attenuators designed for use with signals up to 1 GHz. Each attenuator has a male and a female BNC connector.
Please note: The TA050 attenuators must be used with a matched 50-ohm source and load. If you wish to attenuate a signal before feeding it into a high-impedance measuring instrument, you must add a 50 ohm feedthrough terminator such as the Pico Technology TA051 feedthrough terminator.
TA050 Specifications |
Bandwidth |
DC to 1 GHz |
Attenuation |
3 dB, 6 dB, 10 dB, 20 dB |
Maximum power dissipation |
1 W |
Input impedance |
50 Ω |
Output impedance |
50 Ω |
VSWR |
1.5:1 or better |
Dimensions |
56 x 20 x 17 mm (approximately 2.2 x 0.8 x 0.7 in) |
Connectors |
BNC, 1 male 1 female |
Construction |
Shielded inner box with plastic shell |
Weight |
24 g (approximately 0.85 oz) each |
Price |
$64.35* |
Feed-Through Terminator
The TA051 feedthrough attenuator is a coaxial terminator with BNC connectors. It is useful for connecting signals from 50-ohm sources into instruments with high-impedance inputs, such as oscilloscopes.
TA051 Specifications |
Bandwidth |
DC to 1 GHz |
Maximum power dissipation |
1 W |
Input impedance |
50 Ω |
Dimensions |
56 x 20 x 17 mm (approximately 2.2 x 0.8 x 0.7 in) |
Connectors |
BNC, 1 male 1 female |
Construction |
Shielded inner box with plastic shell |
Weight |
24 g (approximately 0.85 oz) each |
Price |
$15.67* |
* US Dollar prices are approximate. See price list for detailed pricing
Link to Page containing passive probes....
|