Continuing with our mission to make vehicle diagnostics easier and faster…the new CAN Test Box gives you easy access to the 16 pins of the diagnostic connector that is fitted to all modern vehicles. Depending on the configuration of the vehicle, this may allow you to check power, ground and CAN Bus signal quality. With the test leads supplied you can connect your PicoScope lab scope to the CAN Test Box to monitor signals such as the CAN High and Low. More.....
Gear Tie Reusable Rubber Twist Ties have a tough rubber shell that provides excellent grip, a strong wire inside that holds its shape, and a range of bright colors to catch your eye. At Pico we use them for a number of different applications from hanging up diagnostics tools to tidying cables. The possibilities are endless.
The 18" gear ties are ideal for supporting your WPS500X pressure transducer during tests and preventing any risk of it scratching the vehicle.
The pack contains 6 x 18" Gear Ties in orange.
Gear Tie 12” reusable rubber twist tie
TA297
Gear Tie Reusable Rubber Twist Ties have a tough rubber shell that provides excellent grip, a strong wire inside that holds its shape, and a range of bright colors to catch your eye. At Pico we use them for a number of different applications from hanging up diagnostics tools to tidying cables. The possibilities are endless.
The pack contains 12 x 12" Gear Ties in orange.
Gear Tie 6” reusable rubber twist tie
TA296
Gear Tie Reusable Rubber Twist Ties have a tough rubber shell that provides excellent grip, a strong wire inside that holds its shape, and a range of bright colors to catch your eye. At Pico we use them for a number of different applications from hanging up diagnostics tools to tidying cables. The possibilities are endless.
The pack contains 12 x 6" Gear Ties in orange.
Gear Tie assortment 8 pack
TA295
Gear Tie Reusable Rubber Twist Ties have a tough rubber shell that provides excellent grip, a strong wire inside that holds its shape, and a range of bright colors to catch your eye. At Pico we use them for a number of different applications from hanging up diagnostics tools to tidying cables. The possibilities are endless.
Twist it, Tie it, Reuse it - Gear Ties.
Gear Tie technology from Nite Ize.
PicoScope boom kit
PP985
The PicoScope Boom Kit allows you to store your PicoScope and all your commonly used leads conveniently while allowing for quick access.
The Boom has slots for three current clamps and up to nine cables.
PicoScope engine bay S-hook
MI168
This small but essential accessory makes it easy to keep all those test leads tidy in the engine bay.
The S-hook is about 100 mm (4 in) long and coated in plastic and rubber to protect the vehicle's paintwork and your cables. Hook one end underneath the bonnet or hood, and use the other end to hang a bundle of cables up to about 25 mm (1 in) thick.
Automotive Case
PA084
The Automotive Carry Case, as supplied with our top-of-the-range automotive diagnostic kits. This case is suitable for PicoScope 4225 and 4425 scopes.
If you require a carry case for an older product such as the PicoScope 4223 or 4423, please contact us.
Inspection Lamp
TA225
10 1 high-power LED work lamp with a forward/backward swivel and an integral magnetic base.
The lamp comes complete with a handy storage cradle for recharging from a convenient USB port
Black Protective Rubber case for PicoScope 4423 and 4223
PP938
The PicoScope protective rubber case helps absorb potentially damaging physical shocks to your PicoScope while still giving you unobstructed access to all connectors (being made of rubber, the protective case will also help prevent your PicoScope from damaging the paintwork of the vehicle you’re working on.)
A replaceable bracket on the case allows your PicoScope to be hung from a suitable hook (see the S-hook). When working in the engine bay this allows you to hang your PicoScope from the bonnet/hood giving you easy access to the scope without the worry of ‘cooking’ it on hot engine parts.
The PicoScope protective rubber case is suitable for PicoScope 4000 Series Diagnostic Scopes and PicoScope 3000 Series automotive scopes.
Spare hanging bracket for PicoScope protective rubber case
MI254
A replacement hanging loop for your PicoScope protective rubber case.
Tool trolley drawer labels
PQ099
Set with two Pico Technology branded labels.
1 x small label (65 mm x 635 mm) – intended for the top drawer of the trolley
1 x large label (295 mm by 635 mm) – intended for the bottom drawer on the trolley.
Note: These labels may have to be cut to size to fit the different tool trolley drawers.
Miscellaneous
