SPP-100 (OBSOLETE - NO LONGER AVAILABLE)
Single Channel Parallel Port/EPP Card	BUY US Prices CDN Prices Privacy and Security

Features
 

Description

Quatech's SPP-100 is a PC-Card 2.1 compliant Type-II PCMCIA card which adds an IEEE-1284 compatible parallel port to the host computer. The SPP-100 is the only parallel PCMCIA card on the market which fully supports the IEEE 1284 EPP standard. AS well as EPP mode, the SPP-100 can also function in PC compatible and bi-directional modes. The card includes an interface cable which provides a standard 25-pin female connector output.

The SPP-100 will be assigned to the lowest LPT port available by default. However, users may select the particular LPT port to which the SPP-100 is assigned. In addition, users may specify any base address and interrupt level for the SPP-100.

All necessary software is included to install and configure the SPP-100 for use with DOS/Windows 3.x and OS/2. The SPP-100 is also compatible with Windows 95. Upon request, special software drivers are included for HP Palmtop users.

Suggested Applications

• Interface to printers and plotters
• Bidirectional interface to peripherals that support the IEEE 1284 Interface
• Portable data acquisition
• Interface to external tape drives and hard disks

Specifications

Bus Interface: PCMCIA Card Standard 2.1
Physical Dimensions: Type II (5 mm) PCMCIA card
Maximum Transfer Rate: 700 KB/sec
Power Requirements: 5V @ 20mA
Connector: Standard DSUB-25 connector via a pigtail cable off the Type II PCMCIA Card
Operating Systems Supported: DOS, Windows 3.1x, Windows 95, OS/2

FCC Class B Certified

Ordering Information

When placing your order, please refer to the following product numbers:

SPP-100 - Parallel Port/Enhanced Parallel Port PCMCIA card
CP-SPP - Spare cable for SPP-100

DO YOU NEED AN EXPRESSCARD VERSION OF THE SPP-100
CHECK OUT THE SPPXP-100