FEATURES
|
|
PCMCIA Card Standard Specification 2.1 compliant
|
|
Provides monosync, BISYNC, HDLC, and SDLC synchronous and asynchronous communication protocols
|

|
Maximum data rate of 600 Kbps
|

|
1024-byte data FIFOs
|
|
SYNCDRIVE® software included
|
|
Configured as DTE
|
|
"Hot-swapping" supported
|
|
Programmable baud rate generator
|
|
RS-232 interface through shielded DB-25 connector
|
Description 
Quatech's MPAP-100 is a PC-Card 2.1 compliant Type-II PCMCIA card which adds a single multi-protocol serial interface to the host computer. The MPAP-100 provides a standard RS-232 interface and uses a Zilog 85230 compatible SCC which supports asynchronous, monosync, BISYNC, HDLC, and SDLC synchronous communication protocols.
The MPAP-100 provides software-Selectable 1024-byte data FIFOs for both transmit and receive operations. With the FIFOs enabled, data can be moved to and from the SCC in large blocks, providing for high data throughput and low interrupt overhead.
All necessary software is included to install and configure the card for use with DOS/Windows 3.x, and OS/2. An .inf file will be suplied for Windows 95 upon request only. In addition, Quatech's frame level HDLC and BISYNC driver, SYNCDRIVE, is included free. (SYNCDRIVE is not available for Windows 95.)
Suggested Applications 
• High speed synchronous data communication • Can be used with T1 and fractional T1 pipelines • BISYNC, SDLC and HDLC Communication
Specifications
Bus Interface: PCMCIA Card Standard 2.1 Physical Dimensions: Type II (5 mm) PCMCIA card Maximum Data Rate: 600 Kbps Power Requirements: 5V, 30mA (typ) Connector: Standard DSUB-25 MALE connector via a pigtail cable off the Type II PCMCIA Card
Pin 1: Chassis ground Pin 2: Transmit Data Pin 3: Receive Data Pin 4: Request To Send Pin 5: Clear To Send Pin 6: Data Set Ready Pin 7: Signal Ground Pin 8: Carrier Detect Pin 9: N/C Pin Pin 10: N/C Pin Pin 11: Receive Clock Out Pin 12: N/C Pin 13: N/C Pin 14: N/C Pin 15: Transmit Clock In Data Pin 16: N/C Pin 17: Receive Clock In Pin 18: Local Loopback Pin 19: N/C Pin 20: Data Terminal Ready Pin 21: Remote Loopback Pin 22: N/C Pin 23: N/C Pin 24: Transmit Clock Out Pin 25: Test Mode
 FCC Class B Certified
Ordering Information 
When placing your order, please refer to the following product numbers:
MPAP-100 - RS-232 multi-protocol PCMCIA card CP-MPAP - Spare cable for MPAP-100 SYNCDRIVE®
Software Included: Quatech's frame-level HDLC and Bisync driver, SyncDrive, is included for Windows 95/98/Me and OS/2. For Windows 2000/XP, SyncDrive Plus, a bit-synchronous SDLC/HDLC driver is also included. Both SyncDrive packages are not application programs themselves, but provide C callable routines and C data structures designed to aid users in the development of their own application software.
OS Supported: Win 95/98/ME/OS2/Win 2000 and XP. |