DSP-100
Dual Channel RS-232 Serial Adapter Card	BUY US Prices CDN Prices Privacy and Security

Description

Quatech's DSP-100 is a PC-Card 2.1 compliant Type-II PCMCIA card which add two fully independent asynchronous RS-232 serial interfaces to the host computer. Like all Quatech serial interfaces, the DSP-100 is implemented with 16550 UARTs which provide 16 byte transmit and receive FIFOs for increased performance in multitasking environments and with applications involving high data rates. The DSP-100 is accessed through standard D-9 male connectors.

Users may select the particular I/O address space at which the DSP-100 is to be located. The two serial ports of the DSP-100 may be configured at either the standard COM port I/O address locations or in a 16-byte contiguous I/O address block. Both of the DSP-100's serial ports can share the same interrupt, and an interrupt status register is provided for determining which serial port generated the interrupt.

All necessary software is included to install and configure the cards for use with DOS/Windows 3.x, Windows 95/98, Windows NT 4.0 and OS/2 (an optional communications driver may also be required for OS/2). Support for SCO UNIX System V is optionally available.

Suggested Applications

• Interface to modems, printers, scanners, plotters, mouse, etc.

• Interface to RS-232 networks

• Portable computer applications

Specifications

Bus Interface: PCMCIA Card Standard 2.1
Physical Dimensions: Type II (5 mm) PCMCIA card
Maximum Baud Rate: 115.2K
Power Requirements: 5 volts, 25.75 mA (typical), 33.26 mA (maximum)
Configuration:

COM 1 & 3
COM 2 & 4
COM 5 & 6
COM 6 & 7, etc.
Above COM 4 the DSP-100 will install in the lowest available continuous address block.

Connector: Two Standard DSUB-9 male via a pigtail cable off the Type II PCMCIA Card

PIN 1: Carrier Detect
PIN 2: Data Input
PIN 3: Data Output
PIN 4: Data Terminal Ready
PIN 5: Signal Ground
PIN 6: Data Set Ready
PIN 7: Request to Send
PIN 8: Clear to Send
PIN 9: Ring Indicator

---

Ordering Information

When placing your order, please refer to the following product numbers:

DSP-100 - Dual Channel RS-232 PCMCIA Card
CP-DSP-100 - Spare cable for DSP-100
Windows 95-XP, Windows CE, Linux support
UNIX Enhanced Serial Device Driver
Quatech Communication Utilities Package (DOS & WIN 95)
MID: DOS Serial Communications Package.