 |
 |
|
|
The multichannel SC33 Wireless Sensor accepts inputs and provides signal conditioning for external RTDs. The unit can handle up to 2 inputs and has fully upgradeable firmware. Individual signal condition and configurations are available to accept 2, 3, 4 wire 100 ohm RTDs.
The SC33 with RTD temperature sensors are used in a broad range of industrial process applications in the automotive, food handling and processing, medical/pharmaceutical, petrochemical and agricultural industries among others. Typical applications include monitoring temperature in refrigeration, oven or furnace environment, HVAC, high temperature and a broad range of additional industrial process monitoring and verification.
Remote email or text (SMS) alarms can also be enabled with our HaloCloud service.
|
What's Included:
- SC33 wireless external RTD sensor
- 2 AAA batteries (installed)
Features:
- Secure reliable wireless transmission of RTD temperature data
- Multichannel design with 2 RTD inputs
- Accepts 2, 3, 4 wire 100 ohm RTDs and provides individual channel signal conditioning
- Low power design - Battery powered sensor provides installation location flexibility
- Unmatched battery life expectancy – 7-10 years
- Compact size convenient for easy installation
- Industry leading data storage – up to 120 Billion points
- Powerful DataRecorder software included to chart, log, monitor all individual sensors
- HaloCloud service for access to remote sensor data and configuration from anywhere including from Tablets, Smart Phones, Remote PCs
- Programmable individual sensor alarm set points and alarm notification via email or Text message with HaloCloud service
- Complete setup requires one System Gateway, Model GW2 or GW3. Add sensors as needed with scalable system and gateways capable of handling hundreds of sensors at a single location
Application Examples:
- Food Storage Facilities
- Refrigeration Systems
- Ovens and Furnaces
- Warehouse Facilities
- HVAC Systems
- Industrial Process Monitoring
- Buildings and Facilities management
- Environmental Data Acquisition and Studies
- Automotive
- Medical /Pharmaceutical
- Broad range of process monitoring and verification with Thermistors
Compatable External Sensors:
Measurement |
External sensor |
3 wire - Epoxy Encapsulation, Range -40 to 230C, Cable 36" |
RTD-36E |
3 wire - 12" Metal Probe, Range -40 to 230C, Cable 40" |
RTD-48M |
3 wire - Stainless Steel Probe, Range -50 to 200C, Cable 120" |
RTD-120SS |
3 wire - Stainless Steel Probe, Range -50 to 200C, Cable 120", Glycol Bottle Kit |
RTD-120SS-FRZKIT |
Model Number |
SC33 |
Measurement Channels |
Temperature, 2 Channels |
Sensor |
External RTD - 2,3 or 4 wire 100 ohms RTD |
Measurement Range |
-200 to 800°C (-330 to 1475°F) |
Units |
C, °F |
Sample Rate |
10 Hz to 32 Hrs |
Sensor Response Time (90%) |
1s |
Resolution |
0.01°C (0.02°F) |
Calibrated Accuracy |
±0.1°C (±0.2°F ) |
Digital I/O Channels |
N/A |
Temporary Sensor Memory |
1000 data points |
Long -term Memory (using Gateway): |
Up to 120 billion data points |
LED Indicator |
Green, power and programming indicator |
Required Interface Package |
Gateway GW2, GW3, GW10, GW11, GW12 |
Wireless Data Security |
AES-256 Encryption |
Radio Power |
250mW |
RF Carrier Frequency |
902-928 MHz |
RF Transmit Data Rate |
Auto-adjusting 32-196kbps |
Hopping Channels |
25 |
Modulation |
GFSK |
Transmit Power |
20dBm |
Receiver Sensitivity |
-110dBm typical |
Range (Line of sight) |
Up to 1700’ (0.3 Miles) |
Range (Typical indoors) |
Up to 150' |
Power Requirements |
Battery operated - Std 2 AAA |
Typical Battery Life |
7-10 years |
Enclosure Material |
Ruggedized polycarbonate plastic |
Upgradable Firmware |
Yes |
Indoor/Outdoor |
Outdoor |
Operating Environment |
-40~ 85°C (-40~ 185°F); 0~95%RH non-condensing using optional lithium batteries (supplied alkaline batteries -15~ 55°C) |
Dimensions |
70x45x22 (mm) (2.76" x 1.77" x 1.73") |
Weight |
5oz. with batteries |
Approvals |
US(FCC), CA(IC) |
Warranty |
One (1) year parts and service |
Order Online:
|
|
|
 |