 |
 |
|
CDP-1 Carbon Dioxide Probe
CO2 transmitters for indoor air quality and energy efficiency applications. The ambient or duct mounted CO2 transmitters with junction box offer accuracy and fast/ simple connection to our Model SC18 wireless transmitter in our wireless logging and monitoring systems. CO2 measurement range of 0-2000 PPM at an accuracy of -3% of reading. For CO2 measurements, an infrared/ gas sensing engine accurately monitors CO2 content. The sensor design is based on the absorption of light in a reflective light pipe or wave guide diffusion gas chamber. Light is absorbed in proportion to the CO2 concentration and the remaining light is measured and converted into an analog signal. A gas permeable, water resistant diffusion filter prevents particulate and water contamination of the sensing probe. The Model SC18 wireless transmitter can handle up to four (4) CDP-1 probes or combination of our compatible external sensors.
Specifications:
| Range |
0 - 2000 PPM CO2 |
| Accuracy |
- 40 PPM, - 3% of reading @ 22C |
| Stability |
less then 2% of FS over the life of the sensor |
| Duct Air Velocity Range |
0 to 1500 FPM |
| Power Requirements |
Power supply not included. 18 to 30 VAC, RMS 50/60 HZ or 18 to 42 VDC |
| Junction Box |
Flammability classification UL rated 94V-5VA |
| Operating Temperature |
0 to 50C (32 to 122F) |
| Mounting kit |
Duct Mounting Included. Suitable for Ambient/ Room monitoring |
| Compatable devices |
SC18, 3 ft cable to SC18 included |
| Calibration |
Sensors will be calibrated at zero and span at the factory. Calibration in the field will not be required. Self calibration system maintains sensor calibration, Lifetime guarantee |
| Warranty |
One (1) year parts and service
|
Order Online:
|
|
|
|
|
