MSR plug-in module A2D5HUM1
|
back |
The A2D5HUM1 plug-in module records two input voltages, the level of five digital inputs, the signal from one humidity sensor and the temperature of the humidity sensor. Either the instantaneous value or the average, minimum and maximum values can be logged. In addition, a threshold value can be set and an event triggered should this threshold be exceeded.
Module A2D5
| Measured parameters: |
Voltage
Digital level |
| Measurement range: |
Voltage: 0-3 V
Digital level: 0-3 V |
| Resolution: |
Voltage: 10 Bit
Digital level: 1 Bit |
| Measurement rate: |
100 /s, 10 /s, 1 /s, every 10 s, every 30 s, every 60 s |
| Storage rate: |
Every nth measurement parameter is stored (n = 1-256) |
| Mode of operation: |
Voltages are measured sequentially |
| Input: |
2 x voltage
5 x digital level |
| Storage capacity: |
1 000 000 measurements |
Module HUM1
| Measured parameters: |
Humidity
Temperature |
Measurement range:
Humidity:
Temperature: |
0-100 % relative humidity
-20 °C to 60 °C |
Display resolution:
Humidity:
Temperature: |
0.01 %
0.01 °C |
| Measurement rate: |
1/s , every 10 s, every 30 s, every 60 s |
| Storage rate: |
Every nth measurement parameter is stored (n = 1-256) |
| Mode of operation: |
Humidity and temperature are measured sequentially |
| Input: |
1 x humidity and temperature |
| Storage capacity: |
1 000 000 measurements |
General
| Integration with MSR: |
By qualified personnel |
| Item number: |
B10107 |
| Attachable sensors: |
| Sensors |
Item number |
| Pressure and humidity sensor Fig. |
|
| H-P14K-2 AIR |
B10104-2 |
|
Fig. MSR plug-in module A2D5HUM1
Module Datasheet 
 |
