By using a Virtual CAN Bus, we separate the control task from other tasks. The distributed embedded control system can be developed using standard CAN Controllers and transceivers in a traditional way with well proven tools.
Other tasks such as encryption, transmitter authentication, re-flashing, etc. can be developed by experts in these fields and carried out by using other protocols. With modern technology, the different tasks can run in parallel and simultaneously communicate on the same physical layer.
It is a great advantage to separate the control problems from other problems. The control problem can be solved once and for all by the control experts and other problems by experts in their respective technology fields.
Kvaser USBcan Pro 5xHS is a five channel, high performance, CAN bus interface that provides a quick and flexible way to connect your PC to multiple CAN bus, in real-time. With all channels configured for High Speed CAN (ISO 11898-2), the Kvaser USBcan Pro 5xHS handles transmission and reception of standard and extended CAN messages on the bus with a high time stamp precision. This device is CAN FD ready.
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
Power is taken from the USB bus.
Galvanic isolation.
High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
Fully compatible with J1939, CANopen, NMEA 2000.
Kvaser MagiSync provides automatic time synchronization between several PC-to-bus interfaces connected to the same PC.
Programming functionality to support interface mode e.g. Optimize protocol handling, pre-filter CAN messages directly on the interface, or simulate missing hardware.
Simultaneous operation of multiple devices.
Five CAN channels integrated in a single 26-pin HD D-SUB connector.
Includes 5 channel breakout cable.
Tech Specs
BITRATE
40-1000 kbps
TEMP RANGE
-40 - 85 °C
MESSAGES PER SECOND RECEIVE
20000 mps
MESSAGES PER SECOND SENDING
20000 mps
WEIGHT
150 g
LENGTH
170 mm
HEIGHT
25 mm
CHANNELS
5
CERTIFICATES
CE, RoHS
INTERFACES
USB
CATEGORIES
CAN, Interfaces, PC Interfaces
CONNECTORS
DSUB 9
BUFFERS
On Board Buffer
GALVANIC ISOLATION
Yes
ERROR FRAME GENERATION
Yes
ERROR COUNTERS READING
No
SILENT MODE
Yes
SOUND
No
Downloads
DRIVER
Kvaser DIADEM driver
This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser.
Windows drivers for all our CAN hardware. Please check release notes for information on which Windows versions are supported. It also contain a driver for the virtual CAN bus.
A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work.
Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Link libraries, header files, sample programs, Microsoft Visual Basic and Borland Delphi components, documentation, and more. Note: you need to download and install the appropriate device drivers separately.
