By using a Virtual CAN Bus, we separate the control task from other tasks. The distributed embedded control system can be developed using standard CAN Controllers and transceivers in a traditional way with well proven tools.
Other tasks such as encryption, transmitter authentication, re-flashing, etc. can be developed by experts in these fields and carried out by using other protocols. With modern technology, the different tasks can run in parallel and simultaneously communicate on the same physical layer.
It is a great advantage to separate the control problems from other problems. The control problem can be solved once and for all by the control experts and other problems by experts in their respective technology fields.
Kvaser Memorator Professional HS/HS is a two channel, high performance, CAN (controller area network) bus interface and data logger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC using USB2.0. As a data logger, the Kvaser Memorator Professional is the perfect tool to capture irregular faults in the field or perform remote diagnosis. Advanced configuration features such as message filtering, triggers and error detection mode are made with a user-friendly configuration program (Kvaser’s Memorator Tools software) and stored on the flash disk.
One device for desktop and laptop, combining a standalone CAN bus data logger and a USB CAN bus interface.
Quick and easy plug-and-play installation.
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B) identifiers.
CAN messages are time-stamped with 2 microseconds resolution.
Large on-board RAM buffer for CAN messages.
Two High Speed CAN connections (ISO-11898-2), 10 kbit/s up to 1 Mbit/s.
Galvanic isolation to protect the hardware.
Power from CAN bus or from the USB side.
Built-in real time (calendar) clock with battery backup.
Logger status is indicated with five externally visible LEDs.
Driver support for major operating systems.
Support for Kvaser Linx J1587.
Filters
Log continuously, or logging can be triggered by creating advanced triggers based on messages, data signal values, error messages, external trigger's falling or rising edge, and I/O signals.
Pre- and post-triggers are available without buffer size restrictions, limited by disk space only.
Filter out selectable messages and/or signals to be logged. The identifiers can be picked from a database, or all messages can be logged.
Support for pass as well as stop filters.
Create a counting pass filter to have a message logged at enumerated occurrence.
Handles up to 20,000 msgs/s in standalone logger mode.
External digital output that can drive an LED or a buzzer.
Less than 250 ms boot up time.
Supports Silent Mode - Log bus traffic safely without interfering and "listen-only" mode for bus analysis tools.
Memory Cards and Functions
Standard MMC or SD type flash memory cards can be used up to 2GB.
Support up to 32GB SDHC cards.
Set up several devices in a daisy chain for larger logging capacity.
Transfer recorded data over the USB interface at 1.4 MB/s or an SD card reader at 15 MB/s.
Configuration Software in the PC
Easy to use graphic configuration tool - Memorator Tools.
Configuration of the CAN controller, i.e. bit rate and filters.
Configuration of the trigger conditions.
Configuration of filter for messages to be stored.
Configuration upload and download via USB.
Using the included Kvaser Dispatcher software, a complete measurement setup can be turned into a self-installing package that is sent to a remote location to carry out a specific logging task.
Tech Specs
BITRATE
10-1000 kbps
TEMP RANGE
-40 - 85 °C
MESSAGES PER SECOND RECEIVE
20000 mps
WEIGHT
150 g
LENGTH
90 mm
HEIGHT
25 mm
CHANNELS
2
CERTIFICATES
CE, RoHS
INTERFACES
USB
CATEGORIES
Dataloggers, PC Interfaces
OS
Win Vista, Win 8, Win 7, Win XP
CONNECTORS
DSUB 9
BUFFERS
Auto RX Buffers, Auto TX Buffers, On Board Buffer
GALVANIC ISOLATION
Yes
ERROR FRAME GENERATION
Yes
ERROR COUNTERS READING
Yes
SILENT MODE
Yes
MATERIAL
-
SOUND
No
CURRENT CONSUMPTION
130mA
USA Office
Tel:1.877.902.2979-1.425.223.4311
Fax:1.877.329.4324
Address: 1480 Gulf Road, Suite 837,
PO Box 1364
Point Roberts, WA 98281
Western Canada - Vancouver BC
Tel:1.800.663.6001 or 1.604.925.6150
Fax:1.604.925.6170
Address: 2454 Haywood Ave
West Vancouver, BC V7V 1Y1
Eastern Canada - Markham, Ontario
Tel:1.800.465.0164 or
1.905.513.7027
Fax:1.877.329.4324
