By using a Virtual CAN Bus, we separate the control task from other tasks. The distributed embedded control system can be developed using standard CAN Controllers and transceivers in a traditional way with well proven tools.
Other tasks such as encryption, transmitter authentication, re-flashing, etc. can be developed by experts in these fields and carried out by using other protocols. With modern technology, the different tasks can run in parallel and simultaneously communicate on the same physical layer.
It is a great advantage to separate the control problems from other problems. The control problem can be solved once and for all by the control experts and other problems by experts in their respective technology fields.
Kvaser Memorator 2xHS v2 is a compact, dual channel CAN bus interface and standalone datalogger that allows users to monitor and collect data from two high speed CAN channels simultaneously. Standalone mode logs data to an SD card; interface mode provides a real-time connection between the CAN network and a PC, via USB.
As a data logger, Memorator makes for a perfect flight recorder due to its compact design. Triggers and filters can be set on this device by means of a user-friendly configuration program and stored on the standard SD card (supplied).
The Kvaser Memorator 2xHS v2 is an intermediate level device. For an easy-to-use single channel data logger with no preconfiguration required, visit the Kvaser Memorator Light (00513-6). For advanced trigger and filter options and the ability to run user-developed scripts, plus on-device buffering, opt for the Kvaser Memorator Pro 2xHS v2 (00819-9).
Monitor two CAN channels simultaneously using just one device.
Quick and easy plug-and-play installation.
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
CAN messages are time-stamped with 100 microseconds resolution.
Supports silent mode for analysis tools – listens to the bus without interfering.
Fully compatible with applications written for other Kvaser CAN hardware using Kvaser CANlib.
One SD slot that accepts SD flash disks, currently up to 1 GB.
Two high-speed CAN connections (compliant with ISO 11898-2), up to 1 Mbit/s.
Connects to a PC with a standard USB 2.0 connection.
Power from CAN bus or from the USB side.
Built-in real time (calendar) clock with battery backup.
Logger status is indicated by externally visible LEDs.
Plastic housing with dimension WLH about 55 x 150 x 23 mm (circa 2 x 6 x 1 inch).
Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.
Galvanic isolation.
Tech Specs
BITRATE
50-1000 kbps
TEMP RANGE
-20 - 70 °C
TIMESTAMP
100
MESSAGES PER SECOND RECEIVE
8000 mps
MESSAGES PER SECOND SENDING
8000 mps
WEIGHT
155 g
LENGTH
150 mm
HEIGHT
23 mm
CHANNELS
2
CERTIFICATES
CE, RoHS
INTERFACES
USB
CATEGORIES
CAN, PC INTERFACES, Interfaces, Dataloggers
OS
Win Vista, Win 10, Win 8, Win 7, Win XP, Linux
GALVANIC ISOLATION
Yes
ERROR FRAME GENERATION
No
ERROR COUNTERS READING
No
SILENT MODE
No
CURRENT CONSUMPTION
Up to 3W
Downloads
DRIVER
Kvaser DIADEM driver
This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser.
Windows drivers for all our CAN hardware.
Please check release notes for information on which Windows versions are supported.
It also contain a driver for the virtual CAN bus.
A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work.
Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Link libraries, header files, sample programs, Microsoft Visual Basic and Borland Delphi components, documentation, and more. Note: you need to download and install the appropriate device drivers separately.
