Tinytag Instrumentation

TGP-4704

Voltage data logger with input lead
 

0 to 25V DC

The TGP-4704 is a voltage data logger that is supplied in a robust, waterproof case. It monitors voltages from 0 to 25V DC. Loggers can be factory configured for use with a third-party sensor, for applications such as pressure and wind speed monitoring. To confirm that this logger can be configured to work with a specific sensor, please contact us. This logger requires Tinytag Explorer software and a USB download cable (CAB-0007-USB). The logger is supplied with an input lead (CAB-3239) to connect it to a third-party sensor. For sensors that already have an output cable, a 5-pin connector plug (ACS-9703) is available separately.
 

 Data Sheet |  User Info | Info Leads

• Factory Configuration: Custom Scaling (optional service)
• High accuracy and reading resolution
• Low battery monitor
• Voltage logger, 0 to 25V DC
• Case waterproof to IP68
• CAB-3239 input cable supplied
• 2 user-programmable alarms
• Delayed start option
• User-replaceable battery

This is the easy to use Windows program needed to configure the logger and present the data. The Tinytag Explorer software licence allows unlimited users on one site.

Find out more about the Tinytag Explorer software

You have the option of purchasing calibration certificates with our loggers. Standard measurement points are 0 and 30°C for temperature, 20 and 80 % RH (at 25°C) unless specified otherwise. If you don't order calibration, we guarantee the accuracy figures on our datasheets at the point of purchase.

Find out more about Tinytag calibration