|
The Pulse Counter application that comes with the USBee ZX counts the number of pulses that occur on any of the 8 signal lines while the counting is enabled. You can display the number in edges or pulses (which includes a rising and a falling edge).
You can also use any of the 8 signals as a gate to qualify when pulses should be counted.
|
Digital Channels Measured
|
8
|
|
Analog Channels Measured
|
0
|
|
Minimum Pulse Width [1]
|
83.3nS
|
|
Pulse Count Control
|
Clear, Start and Stop
|
|
Display Mode
|
Pulse or Edge Count
|
|
External Gate Signals
|
up to 7
|
|
Gate Conditions
|
High or Low
|
Below you see the application screen.
|
