USBee RX Suite
|
USBee RX Suite Software (32-bit And 64-Bit)
USBee RX Suite version 2.1.54
Updated 06/17/11
Release Notes
|
Contains the USBee RX Suite software that runs in Demo mode or on the USBee RX Test Pod.
This software does not run on any of the other USBee Test Pod models.
|
Requires .Net Framework 4.0
If you do not have the above, you will be prompted to install it the first time you run the USBee RX Suite software.
|
The .NET Framework 4.0 is required to run the USBee RX Suite. It takes a long time to install, so please be patient - it is worth the wait!
|
There are no active links below this message.
USBee Suite for DX, AX, ZX, SX and BusBee
Note: The USBee Suite download DOES NOT include the drivers. You MUST download and install the USBee software in the USBee DX, USBee AX, USBee ZX, BusBee, or USBee SX sections below to get the USB drivers for your device. Then you can download the USBee Suite that will run on top of those drivers.
|
USBee Suite Pro and Standard Software (32-bit And 64-Bit)
USBee Suite version 1.1.71
Updated 03/23/11
Release Notes
|
Contains the USBee Suite software that runs in Demo mode or on the BusBee, USBee SX, DX, AX and ZX Test Pods.
|
USBee Suite User's Manual (pdf)
|
Detailed Operating Instructions for the USBee Suite.
|
Requires .Net Framework 3.5 SP1
The above install will
install it automatically for you.
|
The .NET Framework 3.5 SP1 is required to run the USBee Suite. It takes a long time to install, so please be patient - it is worth the wait!
|
USBee DX
|
USBee DX Test Pod Software (32-bit)
USBee DX Test Pod Software (64-bit)
Package Version 2.19.0 includes:
DX Logic Analyzer/Oscilloscope version 2.15.0
DX Signal Generator version 1.11.0
updated 02/09/09
USBee DX User's Manual
USBee DX Data Extractor Software
|
Contains the USBee DX Test Pod software including Oscilloscope and Logic Analyzer, DVM, Signal Generator, Data Logger, Remote Controller, Frequency Counter, Frequency Generator, PWM Controller, Pulse Counter and I2C Controller. Also includes the USBee DX Toolbuilder Source Code for making your own tools in Visual Basic or C with the USBee DX. All of the USBee DX software products operate in demonstration mode if no USBee DX Test Pod is present.
|
PacketPresenter Definition Files
|
MIDI Commands
|
Basic MIDI commands over a 31.25Kbaud Async channel at 8,N,1.
|
CAN packet decode
|
Breakout of the CAN protocol. Ready to extract device specific fields.
|
1-Wire devices
|
Support for Maxim/Dallas Digital Thermometers, Serial Number iButtons and 1-Wire EEPROMs.
|
I2C 8-bit address EEPROMs
|
Support for I2C EEPROMs with 8 bit addressing.
|
PS2 Keyboard devices
|
Decodes host and device communication for PS2 Keyboards.
|
Cypress Semiconductor RFIC SPI interface
|
Decodes register reads and writes for the CY6936 RF IC family.
|
USB Protocol
|
Decodes USB protocol into fields. Ready to extract device specific data from transfers. Supports decode for EP0 control transfers as well.
|
Async Example Protocol
|
Decodes commands over an example async channel between two ICs.
|
Edge Detector
|
Displays when an edge transitions on a signal. Useful for seeing out of band signal transitions interleaved with other packet information.
|
BusBee
|
BusBee Software (32-bit)
BusBee Software (64-bit)
version 1.0.0
Updated 02/09/09
|
Contains the BusBee application for monitoring SPI, I2C, Async, 1-Wire, CAN, I2S, Sync Serial, SMBus and USB bus traffic.
|
USBee AX (Standard, Plus and Pro)
|
USBee AX Test Pod Software (32-bit)
USBee AX Test Pod Software (64-bit)
Updated 02/09/09
USBee AX User's Manual
(for AX-Standard, AX-Plus and AX-Pro pods)
|
Contains the USBee AX Test Pod software including Oscilloscope, DVM, Logic Analyzer, Signal Generator, Data Logger, Remote Controller, Frequency Counter, Frequency Generator, PWM Controller, Pulse Counter and I2C Controller. Also includes the USBee AX Toolbuilder Source Code for making your own tools in Visual Basic or C with the AX-Pro. All of the USBee AX software products operate in demonstration mode if no USBee AX Test Pod is present.
|
USBee ZX
|
USBee ZX Digital Test Pod Software (32-bit)
USBee ZX Digital Test Pod Software (64-bit)
Updated 02/09/09
(Version 3.00 - 72 Meg .ZIP file)
|
Contains the USBee ZX Digital Test Pod Logic Analyzer (with I2C and Async serial decoder), Signal Generator, Data Logger, Remote Controller, Frequency Counter, Frequency Generator, PWM Controller, Pulse Counter and I2C Controller. Also includes the USBee ZX Toolbuilder Source Code for making your own tools in Visual Basic or C. All of the USBee ZX software products operate in demonstration mode if no USBee ZX Test Pod is present.
|
USBee ZX Help Files
(72Meg .ZIP file containing AVI tutorials)
|
Complete USBee ZX Help File tutorials in AVI file format. These can be viewed directly with the Windows Media Player and step you through all features of the Logic Analyzer and Signal Generator modules. These file are included on the Installation CD that comes with each purchase. These files are not included intentionally in the above program download to save download time for demo purposes.
|
USBee ZX Tool Builder Users Manual version 1.0
(117K bytes .pdf file)
|
Complete documentation for the USBee ZX Toolbuilder Source Code. Using the USBee Toolbuilder software source code included above, you can build your own USBee Digital Test Tools using our USBee Tool Builder library and Visual Basic or Visual C. Also combine multiple pods to build a single tool with up to 512 signals.
|
USBee SX
|
USBee SX Digital Test Pod Software (32-bit)
USBee SX Digital Test Pod Software (64-bit)
Updated 02/09/09
(Version 2.20 - 72 Meg .ZIP file)
|
Contains the USBee SX Digital Test Pod Logic Analyzer (with I2C, SPI and Async serial decoder) and Signal Generator . All of the USBee SX software products operate in demonstration mode if no USBee SX Test Pod is present.
|
USBee SX Help Files
(72Meg .ZIP file containing AVI tutorials)
|
Complete USBee SX Help File tutorials in AVI file format. These can be viewed directly with the Windows Media Player and step you through all features of the Logic Analyzer and Signal Generator modules. These files are not included intentionally in the above program download to save download time for demo purposes.
|
USBee EX 2.0 Experimenter's Board
|
USBee EX 2.0 Toolbuilder Project and Users Guide
(Version 1.5 - 3.1 Meg .ZIP file uploaded 03/16/06)
|
Complete USBee EX 2.0 Toolbuilder Source Code Visual C and Visual Basic 6.0 projects for controlling the High-Speed USBee EX 2.0 Experimenter's Board.
|