Introduction Applications Features Specifications Ordering Information
Introduction
Specially designed for the factory floor and other harsh industrial environments, the IPC-6806 Node IPC Chassis is meant for system integrators or users who require a compact, rugged PC/XT.AT compatible system. The IPC-6806 is fitted with a 6-slot passive backplane, a 150-Watt power supply, one 3.5" floppy disk drive and one 3.5" hard drive. Status indicators (for power ON/OFF, HDD) and a reset switch are also provided.
Cards are protected from vibration by a rubber buffered clamp. A cooling fan pressurizes the case to keep dust out. A front-loading filter is included to make changing easy. The power supply produces a steady 150 watts, which is more than enough for a full set of cards plus drives and meets UL, CSA, VDE and IEC standards.
This 6-slot enclosure puts a PC bus system in the tightest of spaces-it's only 6.5" wide. Brackets make it easy to mount on walls. And it's an a inexpensive choice for both disk-based and diskless systems.
For maximum protection against equipment failure, a solid-state Flash/RAM/ROM disk card such as our PCD-890 may be installed. With it, you can create a "diskless" remote station or cell controller that's cost effective and durable.
Applications
- Factory floor or other harsh industrial environments
Features
- Drive housing fits one 3.5" floppy and one 3.5" hard drive
- All steel construction
- 6-slot PC/XT/AT compatible passive backplane or 5 slot PCI backplane
- Supports 286, 386, 486 and 586 plug-in CPU cards
- Field-replaceable 150-Watt power supply
- Hold-down clamp insulates cards against vibration
- Dust and dirt protection provided by fan that generates positive air pressure within the chassis
- Low cost, suitable for OEM applications
Specifications
- Construction: Heavy-duty steel
- Drive housing: One 3.5" FDD, one 3.5" HDD
- Dimensions: 6.5" (W) x 6.9" (H) x 15.5" (D) Net Weight: 12.3 lbs.
- Hold-down clamp: Flexible rubber cushions fix plug-in cards in place
- Control panel indicators: LEDs for power ON/OFF, HDD
- Control panel switch: Reset
- Fan: 31 CFM, air filters installed
- Power Supply:
Maximum output: 150 watts at 32o to 122oF (0o to 50oC) Output voltage: 5V@ 15A, 12V @ 5A, -5V @ 1A, -12V @ 1A Input voltage: 90 to 132VAC or 180 to 264VAC automatic range switching
- Safety: UL, CSA and VDE approved
- EMI: Meets FCC and VDE Class A
- MTBF: 50,000 hours at 100% load and 25oF
Environmental Specifications
- Operating temperature: 32o to 122oF (0 to 50oC)
- Relative humidity: 10% to 95%
- Safety: Meets UL/CSA/VDE
- EMI: Meets FCC and VDE Class A
Ordering Information
- IPC-6806
- 6-slot ISA-bus Chassis with Fan, 150W PS & PCA-6106
- IPC-6806P
- 5-slot PCI/ISA-bus Chassis with Fan, 150W PS & PCA-6105P2
- IPC-6806S
- 6-slot PCI/ISA-bus Chassis with Fan, 100W PS & PCA-6106
|