Introduction
Applications
Features
Specifications
Ordering Information
Introduction
The IPC-620 is a rugged 19" rackmount 20-slot PC/AT computer chassis. This unit is especially useful for applications that need a large number of expansion slots and disk drives or in applications where it is necessary to house multiple PC systems in one chassis. The IPC-620 features a segment ISA-bus passive backplane, which can be set as a 20-slot single-systems, 10-10-slot dual-system, 5-5-10-slot tri-system or 5-5-5-5-slot quad-system. Four sets of controls, 8 drive bays, cooling fans, a removable air filter and a 350-watt UL power supply.
Applications
- Telecommunication receiver
- Heavy-duty network server
- Disk array server (supports 8 disk drives)
Features
- 19" rackmount, rugged chassis
- A 20-slot passive backplane providing up to four computer systems
- Four high-speed cooling fans maintaining optimal air ventilation
- 2 front removable air filters
- Drive bays accommodate up to 8 front accessible drives.
- Up to two 350-watt UL redundant power supplies
- Four sets of control switches, keyboard connectors and status indicators
Specifications
General Specifications
- Construction: Heavy-duty steel
- Dimensions: 19"(W) x 7"(H) x 24"(D)
- Net weight: 55 lbs
- Drive bay: Eight front accessible 3.5" drives
- Cooling fans: Up to four high-speed 86 CFM fans (flow out) in the chassis
- Air filter: Two, front panel removable
- Control panel indicators: Four LEDs for Power/Reset indicators
- Control panel switches: Four reset buttons and one power On/Off switch
- Keyboard connectors: Four pre-wired 5-pin DIN connectors on front panel
- Passive backplane: 20 ISA slots, full size, segmented system. 4-layer PCB with two sets of power LEDs for 5V, -5V, 12V, -12V
System Configurations
- Single-system: 20 slots
- Dual-system: 10-10 slots
- Tri-systems: 10-5-5 slots
- Quad-systems: 5-5-5-5 slots
- Operation temperature: 32o to 131oF (0o to 55oC)
- Relative humidity: 10% to 95%@40oC, non-condensing
- Safety: Design meets UL/CSA/TUV
- EMI: Design meets FCC/VDE class A
Power Supply
- Maximum continuous output: 350 watts at 32o to 122o F
- Input voltage: 90 to 132VAC or 180 to 264VAC switchable
- Output voltage: 5V@25A, 12V@10A [email protected], [email protected]
- MTBF: 50,000 hours, at 70% load
- Safety: UL/CSA/TUV Approved
Ordering Information
- IPC-620/350 $1,050.00
19" R/M, 20-slot with 350W UL PS, PCA-6120M, 1-set controls - IPC-620/350-2PS $1,300.00
19" R/M, 20-slot with 2 x 350W UL PS, PCA-6120M, 1-set controls
 |
