 |
 |
|
IPC-610 |
 |
Industrial Rackmount Chassis |
|
Introduction Applications Features Specifications Ordering Information
Introduction
IPC-610 Ruggedized PC Chassis The IPC-610 is a 19' rackmount, PC/AT computer chassis for industrial applications. This unit can accommodate a 14-slot PC/AT bus passive backplane or a standard Baby-AT motherboard and a 110-220V switchable UL power supply. A lockable door in the front secures the unit from any unauthorized access. Two filtered cooling fans maintain positive air circulation through the whole chassis. With its hold-down clamp and shock mounted drive brackets, the IPC-610 can withstand shock, vibration, and dust found in a harsh environment.
Applications
- Telecommunication
- Heavy-duty network server
- Industrial PC controller for the factory floor
Features
- 19" rackmount case meets the EIA RS-310C standard
- All steel construction
- Rackmount stack through for space saving
- 8/14-slot ISA or ISA/PCI-bus passive backplane
- Field-replaceable 250/350-watt UL power supply
- Removable shockmount drive bracket
- Drive bays up to three 5.25" half-height drives plus one 3.5" hard disk
- Dual push-pull fans for the cooling system
- Filtered cooling air reaches all plug-in cards
- Removable air filter
- Lockable door for control panel
- Hold-down clamp protects plug-in cards from vibration
Specifications
- Construction: Cold-rolled, zinc plated heavy-duty steel
- Disk drive bays: Two front accessible half height 5.25" drive bays and One internal 3.5" and
one internal 5.25" drive bay
- Cooling fans:
- One at the rear panel for the power supply (flow-out) - One at the front panel with an air filter (flow-in)
- Dimensions: 19" (W) x 7" (H) x 18" (D) Net Weight: 27.5 lbs.
- Air filter: Front panel, removable
- Hold-down clamp: Flexible rubber cushions fix plug-in cards in place
- Control panel indicators: LEDs for power ON/OFF, HDD and keyboard-lock
- Control panel switches: Power, reset and keyboard-lock switches
- Speaker: Internal 8 Ohm speaker
- Keyboard connector: DIN connectors at both front and back panel
- Power supply:
Maximum output: 250 watts at 32o to 122oF (0o to 50oC) Output voltage: 5V@ 25A, 12V @ 10A, -5V @ 0.3A, -12V @ 0.3A Input voltage: 90 to 132VAC or 180 to 264VAC (switchable)
- Safety: UL, CSA and TUV approved
- EMI: Meets FCC and BZT Class A
- MTBF: 50,000 hours at 70% load and 77oF
Environmental Specifications
- Operating temperature: 32o to 122oF (0 to 50oC)
- Relative humidity: 5% to 95%
- Vibration (operating): 5 to 17 Hz, 0.1" double amplitude displacement; 17 to 500 Hz,
1.5B acceleration peak to peak
- Shock (operating): 10 G acceleration peak (11 msec. duration)
- Safety: Meets UL/CSA/TUV
- EMI: Meets FCC and BZT Class A
Ordering Information
- IPC-610MB/250
19" R/M, 8-slot 250W UL PS for M/B Solution - IPC-610MB/350
19" R/M, 8-slot 350W UL PS for M/B Solution - IPC-610/250
19" R/M, 14-slot 250W UL PS, PCA-6114 - IPC-610/350
19" R/M, 14-slot 350W UL PS, PCA-6114 - IPC-610/DC48
19" R/M, 14-slot 250W DC UL PS, PCA-6114 - IPC-610D/250
19" R/M, 14-slot 250W UL PS, PCA-6114D - IPC-610D/350
19" R/M, 14-slot 350W UL PS, PCA-6114D - IPC-610D/DC48
19" R/M, 14-slot DC48W UL PS, PCA-6114D - IPC-610P/250
19" R/M, 14-slot 250W UL PS, PCA-6114P3 - IPC-610P/350
19" R/M, 14-slot 350W UL PS, PCA-6114P3
    |
|
|
|
 |