Log In

New Product Release


Our new line of USB analog input modules are NOW SHIPPING!

The wait is over for those of you looking for a 12 or 16-bit, 16-channel, multifunction USB analog input board.

With speeds up 500kHz, autocalbration, and real-time calibration, these boards also feature our popular USB/104 form factor.

 Prices start under $350USD, check them out here!

Celebrating 36 Years

Follow us on Facebook for all the latest news, updates and promotions

 

call 9 - 5 PST

Credit Cards Accepted

 

website security

Single Port USB to RS-232, RS-422 and RS-485 Serial Adapters

acces i/o logo
                US Prices
             CDN Prices


Privacy and Security
   
FEATURES Specifications
  • Add a RS-232, RS-422 or RS485 serial port to any USB equipped computer
  • Data transfer rates up to 920K baud
  • Built in six foot cable
  • Plug-n-Play allowing quick connect/disconnect whenever you need an additional serial port
  • Ideal for use with portables and laptops
  • No available board slots needed
  • RoHS Available. Please contact us for ordering information

 

 
These USB adapters are intelligent modules which provide a cost-effective solution for transferring high-speed asynchronous serial data over USB. The adapters provide easy connectivity between the computer and standard communication ports or remote serial devices. No PC reconfiguration, assignment of IRQs, or jumper settings required. The adapter will be recognized as a USB to Serial Adapter and install in the system as a standard COM port.
 

SYSTEM REQUIREMENTS

  • A PC with a minimum of a 75MHz Pentium, or equivalent
  • A minimum of 16M bytes of RAM
  • One available USB type port compliant with USB1.1
  • Drivers are included on our software master CD that normally ships with ACCES hardware. Supported Operating Systems: Windows 98/SE, 2000, Me, XP, Linux - built-in to kernel 2.4.0 , MAC OS/8.2 and higher (including X). Driver information is subject to change. Check with ACCES for updated driver information.

CONNECTIONS TO SYSTEM

The USB adapter is equipped with a USB cable and a USB type A connector for connection to a computer USB port and a male DB-9 for connection to a RS-232 or RS-422/485 equipped data or communication terminal. The USB adapter automatically configures with Windows Plug-n-Play functionality. This means that once you plug the device into a computer, Windows will automatically detect the device and launch an installation wizard.
 

INDICATORS

One two-color LED indicator displays transmission of data (green) or reception of data (orange) of the serial port for easy verification of operation.

 

Specifications

  • Communication speed: 300 to 920K baud
  • I/O Addressing: USB Plug-n-Play - auto selection
  • 384 byte receive buffer / 128 byte transmit buffer for high data throughput
  • USB Bus Powered (No external power supply required)
  • USB 1.1 (can be used with USB 2.0), UHCI / OHCI Specification Compliant
  • Uses FT8U232AM dedicated USB UART
  • Full hardware assisted or X-On/X-Off handshaking in RS-232 mode
  • Supports Auto-RTS in RS-485 mode
  • Interface Connector: DB-9, Male

Ordering Guide and Modes of Operation:

  • USB-232: Only RS-232
  • USB-422: RS-422 Full Duplex (4-wire)
  • USB-485: RS-485 Half Duplex (2-wire). Connections between Tx and Rx pins 2 & 9 and between -Tx and -Rx pins 3 & 1 have to be made in the external cable.
  • USB-422/485:
    • RS-422/485 Full Duplex (4-wire). May need external bias on Tx and -Tx if this is not provided by another device.
    • RS-485 Half Duplex (2-wire) with local echo. Connections between Tx and Rx pins 2 & 9 and between -Tx and -Rx pins 3 & 1 have to be made in the external cable.

Regulatory Compliance

  • This product is in full compliance with CE requirements.


 
 
When ordering RoHS products, please identify this need by using a unique model number suffix, "-RoHS" on all orders. For pricing and lead times, please contact your sales representative.
Part Number Price(USD)
USB-232
USB-422
USB-485
USB-422/485


 View / Download USB-422 Datasheet (in .pdf format)

 
View / Download USB-232 Datasheet (in .pdf format)

 
View / Download USB-422-485 Datasheet (in .pdf format)

 
View / Download USB-485 Datasheet (in .pdf format)
 




 

Acquisition Control Communications Engineering / Systems

 
 
 
USA Office

Tel:1.877.902.2979-1.425.223.4311
Fax:1.877.329.4324
Address: 1480 Gulf Road, Suite 837,
PO Box 1280
Point Roberts, WA 98281

Western Canada - Vancouver BC

Tel:1.800.663.6001 or 1.604.925.6150
Fax:1.604.925.6170
Address: 2454 Haywood Ave
West Vancouver, BC V7V 1Y1

Eastern Canada - Markham, Ontario

Tel:1.800.465.0164 or 1.905.513.7027
Fax:1.905.513.7029
Address: 3075 14th Ave, Unit 219,
Markham, Ontario L3R 0G9