4444 PQ167 Kit Contents
|
|
|
US Prices
CDN Prices
Privacy and Security Policy |
With seven Pico D9 Connected Accessories available, and a large range of test point options, building your own kit can seem daunting.
That's why Pico have assembled three off the shelf kits with everything you need to get started.
|
The PicoScope 4444 1000V CAT III Mains voltage and current kit is a high-resolution differential oscilloscope with three PicoConnect 442 25:1 passive differential probes and three TA368 2000A AC Rogowski current probes. both rated for 1000V CAT III measurement. This kit also includes one TA271 single-ended D9-BNC adaptor. The PicoScope 4444 uses specially designed passive voltage probes that have smaller and lighter interface boxes that allow it to make multiple differential measurements at the same time, while taking power from the D9 intelligent probe interface. The pico D9 interface automatically configures the PicoScope display to the correct probe range.
The 12-bit resolution of the PicoScope 4444 offers greater vertical detail and its deeper capture memory of 256 MS gives it greater horizontal resolution. It is used in non-ground-referenced measurements, safe probing of single phase and 3 phase voltages and currents, measuring power drawn by mobile and IoT devices, hybrid and electric vehicle design, motor drives and inverters. The TA271 D9-BNC adaptor lets you use traditional differential voltage probes and current probes and make single-ended measurements with a ground referenced probe.
|
Picoscope 4444
|
|
PicoConnect 442 25:1 differential Probe [1000V CAT III]
|
|
Shrouded 4mm to 4mm Lead, 1000V CATIII 0.5m, black
|
|
Shrouded 4mm to 4mm Lead, 1000V CATIII 0.5m, Red
|
|
Sprung hook probe 1000V CAT III Black
|
|
Sprung hook probe 1000V CAT III Red
|
|
D9 to single BNC Adaptor
|
|
Picoscope 4444 Carrying Case
|
|
USB 3.0 Cable, 1.8 Meter
|
|
5V AC Power adaptor
|
|
|