The MicroGoose environmental monitor provides Web-based remote surveillance of temperature, relative humidity and dew point. It is especially useful for monitoring environmental conditions in critical applications such as computer server rooms, network closets, server racks in colocation facilities to check against SLAs, clean rooms, laboratories, blood banks, clinics, museums, warehouses or any critical facility.
Easily view and log temperature, relative humidity and dew point over the intranet or the Web. No software required - securely access the graphical user interface from a web browser.
Built-in Power over Ethernet (PoE) converges power and data in between the switch and the MicroGoose, eliminating the need for electrical wiring. Power adapter is provided for applications without PoE support.
SNMP, Email & SMS Alerts
The MicroGoose can trigger escalating alarms if temperature or humidity fall outside of specified parameters via SNMP (v1, v2c, v3), email and SMS messages (e-mail to SMS gateway). For example, specify an email notification to one or more users at 70° F, add another layer of personnel to the email alarm at 80° F, add your third party contractor at 85° F...specify up to 200 alarms per unit.
View Charts and Graphs on the Web
The MicroGoose serves active Web pages displaying real time readings and graphs of temperature, humidity and dew point in addition to data logs in standard format (downloadable as XML or CSV file). Graphing scales are fully adjustable.
Interface Network IP Cameras
The Web page interfaces up to four IP cameras (not included), allowing you a quick view of remote conditions, especially useful in event of alarm.
No Software Required
The MicroGoose is simple to install and use, requiring no special software other than a standard Web Browser. The MicroGoose connects to an Ethernet Network with a standard RJ45 connector and sends data in standard TCP/IP packets. It is easily configured with a simple menu using a Web Browser and can be password protected with 3 access account level types: Administrator, Control, View Only. From within an Intranet or over the Internet, the user can securely access the monitor by entering its IP address.
Specifications
On-board Sensors:
Temperature: -22 to 185 °F (-30 to 85 °C), /- 0.5 °C
Humidity: 0 to 100%, /- 5%
Physical: 4"L x 1.5"H x 1.5"W, 0.5 pounds
Power: via PoE or 6VDC power supply (included)
Ethernet: 10 Mbps, RJ-45 receptacle
Real Time Clock (RTC) with power backup
Reset IP push-button: restores factory defaults
Standards: FCC Part 15, 802.3fc (PoE)
Warranty: 1 year (extended warranties available)
Software Features:
HTTP/HTTPS: web access
Alarms: high/low values, multiple thresholds per sensor
ESMTP / POP3: email alerts, ESMTP / POP3 auth
SNMP (v1, v2c, v3): gets, trap and clear alerts, MIB
Paging: email to pager proxy
XML: meta-tagged sensor values, alarms, config
Syslog: send debug messages to Syslog server
Web interface: 4 styles to choose from
Access-control: 3 access levels (admin, control, view only)
Web cams (optional): Up to four can be displayed
Compatible with WatchDog Racknet Node Manager
