NOTE THAT ALL WATCHDOG PRODUCTS ARE END OF LIFE. INTERWORLD STILL HAS A SMALL NUMBER OF ACCESSORIES ON HAND.

A NEW REPLACEMENT PRODUCT LINE IS DUE TO BE OUT SOMETIME SOON.

FOR SUPPORT ON THE OLD SERIES OF WATCHDOG PRODUCTS, PLEASE CONTACT:
VERTIV AT [email protected]

ALL LINKS NO LONGER WORK SINCE ITWATCHDOGS CLOSED THEIR SITE.
Please Contact Vertiv for any further information on old ITWatchdog Products.

Firmware / Software - WxGoos Series I What series is my climate monitor?

Download the latest firmware for the WxGoos Series I. Follow the included directions carefully or the unit may be permanently damaged. Download automatically erases previous firmware so no erase is needed.

This firmware supports the following devices:

RCM-H RCM-H IEC SuperGoose WeatherGoose MiniGoose MiniGoose 2 PowerGoose

Downloads

2.88 WxGoos Series I Firmware (2009-12-04 553KB): - fixed: Fixed a security hole that could allow changes to a unit's configuration without requiring a password; - added: Support for D-Link DCS-920 WebCam
2.87 WxGoos Series I Firmware (2009-11-06 553KB): - fixed: Improved communications with RTAFH and RTHD sensors; - fixed: A potential false alarm when using a temperature offset; - added: A checkbox on the Alarms page to stop nuisance sensor unplugged alarms; - added: Support for most D-Link cameras; - added: Support for most Axis cameras
2.86 WxGoos Series I Firmware (2009-08-14 550KB): - fixed: sensors showing up unplugged after one bad reading; - changed: Emails now send current IP address when using DHCP; - changed: Config page shows current network information when using DHCP
2.84 WxGoos Series I Firmware (2009-03-02 561KB): - added: Support for D-Link DCS-3410 and DCS-910; - added: SNMP Set on sysLocation, sysName, sysContact; - added: Device description fields refer to sysLocation, sysName, and sysContact; - fixed: Temperature offset not used in certain error conditions; - fixed: SNMP reports all amp readings in deciAmps; - changed: MIB entry name and titles are more consistent; - added: MIB entry units to CSV file
2.78 WxGoos Series I Firmware (2008-05-05 550KB): - added: Support for Panasonic IP-enabled webcams; - fixed: Improved compatibility with Apache proxy; - fixed: Friendly name display bug; - fixed: Improved CSV file compatibility with Excel^TM; - fixed: "address-backup" attribute in XML; - fixed: SSL partial packet bug; - removed: unused SNMP Read/Write Community from config page
2.76 WxGoos Series I Firmware (2008-02-04 550KB): - added: CCAT sensor types for City Power Monitor, Smoke Alarm, -48Vdc, 30Vdc; - added: ESMTP AUTH support ( login, plain, CRAM-MD5 ); - fixed: new SNMP code with speed & stability improvements ( download new MIB from Goose ); - fixed: WAP page incompatibility with some mobile browsers; - fixed: XML Dewpoint sensor keys aliased with Temperature keys
2.75 WxGoos Series I Firmware (2008-01-10 567KB): - added: unit description field to Config page and footer; - added: sensor count to SNMP; - fixed: multiple sensor instances issue; - fixed: alarms show tripped status on XML page; - fixed: SSL problems
2.72 WxGoos Series I Firmware (2007-10-09 566KB): - fixed: remote temp sensor value glitches; - fixed: negative values mislabeled on graph axis; - fixed: max values on graph coincide with graph border
2.70 WxGoos Series I Firmware (2007-09-20 563KB): - added: immediate sensor value displayed in 'logs' page; - added: support for digital CCAT sensor; - added: support for D-Link DCS-2000; - fixed: WAP page not affected by view-only account; - fixed: friendly device name not displayed in browser window
2.65 WxGoos Series I Firmware (2007-06-22 562KB): - added: support for dew point sensor; - added: alarmTripType SNMP Trap variable binding; - added: support for D-LINK DCS-3220; - fixed: NTP service did not switch between primary/secondary addresses on NTP server timeout; - fixed: temp sensors become unplugged near 0 °C; - fixed: sensor friendly name and product friendly name in MIB Trap definition; - fixed: incorrect sensor friendly name OID value in SNMP trap
2.63 WxGoos Series I Firmware (2007-01-12 555KB): - fixed: DNS applies to NTP; - fixed: updater not allowing updates to units with certain older firmwares
2.62 WxGoos Series I Firmware (2006-11-14 542KB): - added: Support for DNS names in SMTP, POP3, SNMP, and NTP server names; - added: PDA control page for RCM; - added: Support for D-Link DCS-6620 camera; - added: Telnet "uptime" command displaying elapsed time since last reboot; - added: Telnet "datalog" command to dump sensor log data for debugging; - added: Alarm emails now display most useful information first for devices that truncate emails (e.g. cell phones); - added: Device administration information now included in status report and alarm emails; - fixed: Adding in missing imports (normally tacit) from MIB; - fixed: MiniGoose and RSMINI163 now respect user-specified internal temperature offset; - fixed: Alarm buzzer option removed for RSMINI163; - fixed: No longer allows arbitrary number of simultaneous telnet connections; - fixed: Device checksum not being displayed in telnet "report" command; - fixed: Removed "HTML v4.0.1 Verified" image from the bottom of the page as it gave spurious error message on certain browsers when using HTTP/SSL
2.60 WxGoos Series I Firmware (2006-08-18 531KB): - added: Periodic status report email, configurable frequency; - added: Internal temperature adjustment from web page; - added: Complete support for HTML v4.01 W3C standard; - added: Alarm e-mails now more descriptive; - added: Configurable port numbers for SMTP and POP3 services; - added: Checkboxes work when you click on their labels; - added: Better error-handling for timezone offset setting; - fixed: Saving alarms page could sometimes send extra alarm notification; - fixed: First char in camera IP had to be a digit; now it can be alphanumeric; - fixed: Support for SMTP servers that output multiple lines for welcome message; - fixed: Changing NTP timezone no longer forces reboot; - fixed: MIB CSV file now has correct values for "read/write" column; - fixed: Downloading CSV raw log data and log dumps is now cancelled when firmware upload is initiated
2.56 WxGoos Series I Firmware (2006-05-16 531KB): - added: Support for up to 4 cameras displayed on a single unit; - added: Support for D-Link DCS-5300/5300G camera; - added: Support for MiniRSE 136; - fixed: Read-only username couldn't be set in certain cases; - fixed: Support for up to 16 RTAFH sensors (was failing after 12); - fixed: HTML/XML error when certain special characters appears in friendly names or logging statements; - fixed: Buffer over-run in event time-stamp logger; - fixed: Removed special "(None)" FTP account; - fixed: Very occassional "[nil]" displayed as the name of the unit
2.55 WxGoos Series I Firmware (2006-04-12 531KB): - added: SNMP community strings for read-only and read/write access; - added: Including Excel^TM spreadsheet with detailed MIB report in installer ZIP file; - added: Support for browsers (especially on PDA's) that don't support the