 |
 |
|
Digitizer Drivers
| Drivers |
|
|
Technical Support for Digitizers, Graphics Tablets, Measuring Systems, Plotters & Printers
|
| |
Notice
In September 2004 a patent lawsuit brought by Al Schumer and his company Digitizer Technology Company, LLC against Wacom & LCS/Telegraphics, was settled. There are a number of consequences that affect our industry. As a result of the settlement, the version of the Wintab driver that GTCO CalComp provides for our digitizer products will no longer be available as of October 8, 2004.
We regret the difficulty these events have imposed. We do not believe the drivers infringe Mr. Schumer’s patents (US Patent Nos. 5,768,492 and 6,353,433), nonetheless, we are making the changes to drivers to avoid any questions or difficulties for our customers. (Existing End Users are covered under the settlement agreement).
If you need a driver which implements the functionality we are removing from our drivers, then you may want to contact Digitizer Technology Company. DTC provides the Virtual Tablet Interface to users at an additional charge. More information on pricing and licensing can be found at www.vtablet.com. It is unclear whether GTCO CalComp will be able to provide an OEM version of the Virtual Tablet Interface to customers in the future.
Our current tabletworks driver provides most of the functionality of the original driver however any application which uses menu commands from the surface of the digitizer will not work with our driver. Go to http://www.vtablet.com to obtain this driver.
Continue on to Support sections...
|
| |
| |
|
| |
 |
|
 |
|
 |
|
 |
| |
CalComp Brand Digitizers,
& Graphics Tablets |
|
GTCO Brand Digitizers, Graphics Tablets,
& Measuring Systems |
|
GTCO CalComp Brand
Digitizers |
|
Summagraphics Brand
Digitizers & Graphics Tablets |
|
|
| |
UP
| Drivers & Software |
| Product |
Operating System |
Software |
Download |
Read Me
|
AccuTab VI
AccuTab III
AccuTab II
DrawingBoard VI
DrawingBoard V
DrawingBoard IV
DrawingBoard III
Roll-Up III
Roll-Up II
Summagrid VII
Summagrid VI
Summasketch III
Super L VI
Super L IV
Super L III
Older CalComp, GTCO, GTCO CalComp, and SummaGraphics tablets not in this list should work, but have not been tested. |
Windows 7**
Windows Vista
Windows XP
Windows 2000
Windows NT 4.0, SP6 or greater (serial only)
Windows 98 SE
Windows Me |
TabletWorks
Version 10.09
** please note that only version 10.09 supports Windows 7 in addition to all other operating systems listed.
S T O P !
SEE IMPORTANT PRECAUTIONS BELOW!
|
TW-10.09.0024.exe
Size: 13.7MB
Date: May 2010 |
Release
Notes
|
|
Older CalComp, GTCO, GTCO CalComp, and SummaGraphics tablets not in this list should work, but have not been tested.
Windows 7
Windows Vista
Windows XP
Windows 2000
Windows NT 4.0, SP6 or greater (serial only)
Windows 98 SE
Windows Me
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AccuTab VI
AccuTab III
AccuTab II
DrawingBoard VI
DrawingBoard V
DrawingBoard IV
DrawingBoard III
Roll-Up III
Roll-Up II
Summagrid VII
Summagrid VI
Summasketch III
Super L VI
Super L IV
Super L III
Older CalComp, GTCO, GTCO CalComp, and SummaGraphics tablets not in this list should work, but have not been tested.
Windows 7
Windows Vista
Windows XP
Windows 2000
Windows NT 4.0, SP6 or greater (serial only)
Windows 98 SE
Windows Me
|
TabletWorks
Version 10.08.0014
See Important Note Below !
|
TW-10.08.0014.exe
13.4MB
February 2009 |
Release Notes |
TabletWorks
Version 10.07.07
See Important Note Below !
|
TW-10.07.0007.exe
12.5MB
October 2008 |
Release Notes |
TabletWorks
Version 10.06
IMPORTANT --->
|
TW-10.06.0011.exe
Size: 12.3MB
Date: March 2008
Precautions:
1. If you are using software with multiple menu areas defined, the TabletWorks 10.06 driver should not be installed. This driver will not allow you to define the areas that are required.
2. If you are currently using TabletWorks 7.xx driver and you do not have a copy of the CD or the original executable file, do not uninstall the driver. You will need to test the TabletWorks 10.06 driver on a computer other than the computer used for daily operations.
TW-10.05.0005.zip
|
Release
Notes
Release
Notes
|
|
AccuTab VI
AccuTab III
AccuTab II
DrawingBoard VI
DrawingBoard V
DrawingBoard IV
DrawingBoard III
(DBIII Small Format must use 10.03 Driver)
Roll-Up III
Roll-Up II
Summagrid VII
Summagrid VI
Summasketch III
Super L VI
Super L IV
Super L III
Older CalComp, GTCO, GTCO CalComp, and SummaGraphics tablets not in this list should work, but have not been tested.
|
Windows Vista
Windows XP
Windows 2000
Windows NT 4.0, SP6 or greater (serial only)
Windows 98 SE
Windows Me |
TabletWorks
Version 10.04
|
TW-10.04.0002.zip
Size: 8.9MB
Date: October 2006 |
Release
Notes
|
Test Programs
| Product |
Operating System |
Software |
File Download |
Size |
Date |
Read Me |
AccuTab II
(Advanced Configuration)
Jumbo Summagrid
(Advanced Configuration)
Roll-Up III
Super L III
(Advanced Configuration)
(All tablets installed and
working with TabletWorks.) |
Windows
95, 98, Me, NT,
2000, XP |
Tablet
Configuration
Utilities
Supported Drivers:
TabletWorks versions
5.x to 7.x and
TabletWorks for Citrix |
TCU 3.4.1.exe |
9.3MB |
8-27-04 |
User's Guide
[467KB PDF] |
|
| |
Other Drivers. |
| SONIC Digitizer drivers: GP-9
The GP-9 Driver Disk V 1.4 contains GP-9 configuration and driver files. This disk is available for download. Note that this disk is a self extracting Zip file. Download the file to an empty directory before unzipping it. After downloading, double click on Gp9v1-4.exe to unzip the file. After unzipping the GP-9 Driver Disk, you must EXIT WINDOWS.
To download this disk, click GP-9 Configuration and driver files (Driver disk v 1.4)
From DOS (NOT from a Windows DOS prompt), change to the directory containing the unzipped GP-9 Driver Disk. At the DOS prompt, type edit readme.doc to receive further instructions.
FreePoint 3D (GP-12) (Windows 95, 98, NT ) (V3.10)
FreePoint 3D (GP-12) (Windows 3.x ) (V2.12)
DOS
|
QuickRuler Driver: This driver will allow you to send readings from the QuickRuler into any Windows application through the keyboard interrupt - QR-IBM.EXE |
The links to these drivers are checked on a regular basis, however, if you find an error when trying to download these drivers please send an e-mail to Webmaster at support@interworldna.com and advise us of the error. Thank you.
|
| |
Drivers not effected by the Lawsuit |
| SONIC Digitizer drivers: GP-9
The GP-9 Driver Disk V 1.4 contains GP-9 configuration and driver files. This disk is available for download. Note that this disk is a self extracting Zip file. Download the file to an empty directory before unzipping it. After downloading, double click on Gp9v1-4.exe to unzip the file. After unzipping the GP-9 Driver Disk, you must EXIT WINDOWS.
To download this disk, click GP-9 Configuration and driver files (Driver disk v 1.4)
From DOS (NOT from a Windows DOS prompt), change to the directory containing the unzipped GP-9 Driver Disk. At the DOS prompt, type edit readme.doc to receive further instructions.
FreePoint 3D (GP-12)
|
The links to these drivers are checked on a regular basis, however, if you find an error when trying to download these drivers please send an e-mail to Webmaster at support@interworldna.com and advise us of the error. Thank you.
|
| |
|
|
|
|
|
