MSR385WD: Data Logger With Wireless Transmission – LTE or LAN Terminal for Remote Climate Monitoring

wireless data logger for temperature, humidity, air pressure · 1 million measured values storage capacity · transmitter modules for operating temperatures up to +125 °C · ideal for long-term monitoring of climate values

Temperature-resistant transmitter modules MSR385SM

The transmitter modules equipped with temperature, humidity and/or air pressure radio sensors transmit the measured values to the MSR385WD data logger in an ISM band that can be used licence-free. Due to their heat resistance, the transmitter modules – depending on the housing type – allow metrological applications even at high working temperatures of up to +125°C. Thanks to the compact housing, they can also be placed in locations that are difficult to access. Optimised power management ensures that the power supply of the transmitter modules is guaranteed for over ten years, depending on the enclosure type, frequency of measurements and transmission interval.

MSR385WD data logger: receiving station with LTE or LAN and USB interface

The centrepiece of the wireless measurement system is the MSR385WD data logger, which is equipped with a memory capacity of more than one million measured values. This multi-channel data logger has an integrated ISM band receiver module through which it receives and stores data from up to ten MSR385SM transmitter modules. The data logger is supplied with power by means of a USB connection; with the integrated rechargeable 2400 mAh lithium-polymer battery, it can be operated autonomously for up to two days. A flash memory safeguards the data security in the event of a power failure. The colour OLED display of the data logger is at your disposal for simply reading the measured values locally from the transmitter modules.

Ideal for remote climate monitoring: retrieve measured data from the MSR SmartCloud

The web-based cloud service by MSR allows the user to store the measured data transmitted by the LTE/LAN terminal of the logger on a server via the Internet. This way, measured data can not only be retrieved and observed using any PC with an Internet connection, wherever you are; via MSR SmartCloud alarm messages can be received if limit values are exceeded and, if required, the data from several MSR data loggers can be shared with other people.

The measured data of the small wireless transmitter modules recorded by the data logger can be read out via a USB interface and processed further using the MSR PC software for data analysis purposes. Alternatively, you can use the optional LTE or LAN terminal to access the mobile network and to transmit the data to the MSR SmartCloud for remote monitoring at an interval that can be adjusted individually.

Configure your own custom MSR385WD variant here!

With a few clicks you are able to select your desired MSR385WD.

1. Select the temperature range and the housing of the MSR385SM transmitter module.
2. Select the sensors for the MSR385SM transmitter module.
3. Select the MSR385WD Wireless Data Logger here.
4. Do you require a terminal for transmitting the measured data to the MSR SmartCloud?
5. The use of MSR SmartCloud.

1. Select the temperature range and the housing of the MSR385SM transmitter module.

The level of the temperature to which you are going to expose the transmitter module determines the composition of its housing. Therefore, first of all please select the housing for the desired temperature range here. This concerns only the transmitter module – the actual data logger is selected in step 3.

Temperature range	Housing and battery	Picture	Size & weight	Medium	Item No.
-20...+125 °C	Silicone hose with non user replaceable 800 mAh Li-SOCl2 battery, not encapsulated, IP 60		35 x 25 x 55 mm (W x H x L) approx. 25 g	Air	385SMB63 Error select
	Silicone hose with non user replaceable 800 mAh Li-SOCl2 battery, encapsulated, waterproof IP 67		35 x 25 x 55 mm (W x H x L) approx. 40 g	Air, various liquids	385SMB64 Error select
-20...+85 °C	ABS housing with replaceable 3600 mAh Li-SOCl2 battery (> 10 years @ transmission freq. of 15 min.), external aerial, not encapsulated, IP 64		60 x 33 x 80 mm (W x H x L) Antennenlänge: 93 mm approx. 120 g	Air	385SMB66 Error select
-20...+65 °C	ABS housing with rechargeable 260 mAh LiPo battery, not encapsulated, IP 60		38 x 15 x 78 mm (W x H x L) approx. 45 g	Air	385SMB65 Error select

2. Select the sensors for the MSR385SM transmitter module.

You can equip the transmitter module with up to three different internal and/or external sensors. We are continuously expanding our range of sensor combinations.

3. Select the MSR385WD Wireless Data Logger here.

If you already own a MSR385WD and wish to reorder just transmitter modules, you can skip step 3.

General technical information on the MSR385WD wireless data logger		Item no.
	The data logger, which operates within the 868 MHz (EU version) or 915 MHz (US version, on request) ISM frequency band, receives and stores the measured data from up to ten MSR385SM transmitter modules. Flash memory for data security in the event of a power failure. Brilliant, high-contrast OLED (organic light-emitting diode) colour display. Dimensions: Housing without aerial: 75 x 25 x 120 mm (W x H x L) Aerial length: 85 mm Memory capacity: Over 1 000 000 measured values. Power supply:   Via USB connection (2 days’ autonomous operation possible with integrated 2400 mAh LiPo battery). LED: Blue: Data recording indicator Red: Alarm indicator Yellow: Charge level indicator Key button: To operate the menu functions of the OLED display. Interface: USB, LTE PC-Software: Free Setup, Reader, Viewer & Online software for recording and analysing the data (Windows 7/8/10). Operating conditions:   -20 °C to +65 °C. Storage conditions: +5...+45 °C (ideal storage conditions for battery). 10...95 % relative humidity, non-condensing. Standards: The MSR385WD complies with the EU Directive RoHS / WEEE.	385WDB61 Error select

4. Do you require a terminal for transmitting the measured data to the MSR SmartCloud?

A LTE terminal will be needed if measurement data is to be sent to MSR SmartCloud via a mobile network. A LAN terminal will be needed if measurement data is to be sent to MSR SmartCloud via LAN.

Item	Description	Item no.
LTE terminal	LTE terminal, incl. short aerial and connecting cable. The SIM card for the LTE terminal can be ordered separately. LTE frequency bands:   B1, B3, B7, B8, B20 Dimensions: 66 x 26 x 77 mm (W x H x L) Weight: 80 g Operating conditions: -30 °C...+75 °C Power supply: via MSR385WD	N10129 Error select
LTE aerial	External magnetic foot aerial with 3 m cable.	N10121 Error select
SIM card (EU version)	1 SIM card Sending data via mobile network to MSR SmartCloud for the first 12 months.	N10111 Error select
Extension (EU-Version)	Sending data via mobile network to MSR SmartCloud for subsequent 12 month period.	N10113 Error select

Item	Description	Item no.
LAN terminal	The MSR Base Station (LAN Box) allows automated transmission of measurement data via LAN to MSR SmartCloud.	N10110 Error select

5. The use of MSR SmartCloud.

The cloud solution managed by MSR Electronics GmbH records data measured by MSR data loggers in a database. Through online access to MSR SmartCloud you are able to gain insight into your measured data, manage it, and create alert messages. When ordering the MSR145W2D data logger you will automatically receive the access code to MSR SmartCloud.

Your selection: