 |
 |
|
Waveform buffer Normal Triggering Rapid Block Triggering
| Oscilloscope |
| Variant |
PicoScope 2203
(PP418)
|
PicoScope 2204
(PP419)
|
PicoScope 2205
(PP420)
| PicoScope 2206 (PP800) | PicoScope 2207 (PP801) | PicoScope 2208 (PP802) |
| Bandwidth |
5 MHz |
10 MHz |
25 MHz |
50 MHz |
100 MHz |
200 MHz |
| Rise Time (Calculated) |
|
35 ns |
14 ns |
7 ns |
3.5 ns |
1.75 ns |
| Channels |
2 |
| Vertical resolution |
8 bits |
| Enhanced vertical resolution |
12 bits |
| Dynamic range |
48 dB |
| DC Accuracy |
±3% of full scale
|
| Input ranges (full scale) |
±50 mV to ±20 V in 9 ranges |
Analog offset range (Vertical position adjustment) |
none |
±200 mv (50 mv to 200 mv ranges) ±2.5 V (500 mv, 1 V, 2 V ranges) ±20 V (5V, 10 V, 20 V ranges) |
| Input characteristics |
1 MΩ in parallel with 20 pF or less |
1 MΩ ±1% // 13 pf ±1 pf
|
| Overload protection |
±100 V (DC AC peak)
|
| Input type |
Single-ended, BNC connector |
| Input coupling |
Software selectable AC/DC |
Maximum sampling rate (single shot) One channel in use Two channels in use |
40 MS/s 20 MS/s |
100 MS/s 50 MS/s |
200 MS/s 100 MS/s |
500 MS/s 250 MS/s |
1 GS/s 500 MS/s |
1 GS/s 500 MS/s |
| Maximum sampling rate (repetitive signals) |
1 GS/s |
2 GS/s |
4 GS/s |
5 GSs |
10 GS/s |
10 GS/s |
Maximum sampling rate (continuous streaming mode) |
1 MS/s (typical) in PicoScope Rate using the supplied SDK is PC dependent
|
Record length One channel in use Two channels in use |
8 kS/channel 4 kS/channel |
8 kS/channel 4 kS/channel |
16 kS/channel 8 kS/channel |
24 kS/channel 12 kS/channel |
32 kS/channel 16 kS/channel |
40 kS/channel 20 kS/channel |
| Record length (in streaming mode) |
2 M samples per channel |
| |
Up to 10,000 waveforms not applicable |
Up to 10,000 waveforms Up to 32 waveforms |
| Timebase ranges |
50 ns/div to 20 s/div in 27 ranges |
10 ns to 1000 s/div |
5 ns to 1000 s/div |
2 ns to 1000 s/div |
1 ns to 1000 s/div |
500 ps to 1000 s/div |
| Timebase accuracy |
±100 ppm
|
±50 ppm
|
| Triggers |
| Source |
Ch A or Ch B |
| Basic triggers |
Rising edge, falling edge, threshold |
| Advanced triggers |
none |
none |
Pulse width, dropout, window, logic |
| Spectrum Analyser |
| Bandwidth |
5 MHz |
10 MHz |
25 MHz |
|
|
|
| Frequency range |
DC to 5 MHz |
DC to 10 MHz |
DC to 25 MHz |
DC to 50 MHz |
DC to 100 MHz |
DC to 200 MHz |
| Display modes |
Magnitude, peak hold, average |
| Windows types |
Blackman, gaussian, triangular, hamming, hann, blackman-harris, flat-top, rectangular |
| Number of FFT Points |
Selectable from 128 to half the available buffer memory in powers of 2 |
| Arbitrary Waveform Generator |
| Connector type |
BNC |
| Buffer size |
4 kS |
8 kS |
| Vertical resolution |
8 bits |
12 bits |
| Output range |
±125 mV to ±2 V pk-pk with ±1 V offset |
| Output resistance |
600 Ω |
| Clock frequency |
2 MHz |
| Bandwidth |
DC to 1 MHz |
| PC Requirements |
| Minimum |
Processor: Pentium II processor, or equivalent Memory: 64 MB (XP) / 512 MB (Vista) minimum Operating system: Microsoft Windows XP SP2, Vista and Windows 7 (32 or 64 bit) Ports: USB 1.1 compliant port |
| Recommended |
Processor: 2 GHz Pentium IV processor, or equivalent Memory: 256 MB (XP) / 1 GB (Vista) Operating system: Microsoft Windows XP SP2, Vista and Windows 7 (32 or 64 bit) Ports: USB 2.0 compliant port |
| Environmental |
| Operating temperature range |
5 °C to 45 °C |
Storage environment Temperature range Humidity | -20 °C to 60 °C 5% to 95% RH, non-condensing |
| Physical Dimensions |
| Dimensions |
100 x 135 x 45 mm (approx 3.9 x 5.3 x 1.8 in) (Does not include BNC connectors) |
| Weight |
210 g (approx 7.4 oz) |
| General |
| Supplied software/hardware |
PicoScope 6 and PicoLog software Drivers and examples for LabVIEW, C, C , Delphi and VB USB 2.0 cable |
| PC interface |
USB 2.0 (USB 1.1 compatible) - cable supplied |
| Power requirements |
From USB port |
| Approvals |
FCC, CE |
| |
2203 (PP418)
|
2204 (PP419)
|
2205 (PP420)
|
2206 (PP800) |
2207 (PP801) |
2208 (PP802) |
| Buy online: |
|
|
|
|
|
|
|
|
|
|
 |