|
Check out the new 2200 Ultra Compact Series
- NEW!
The PicoScope 2202 is a
low-cost PC oscilloscope from Pico — the world leader in PC oscilloscope
design.
With a fast USB 2.0 interface,
20 MS/s sampling and 2 MHz
bandwidth the PicoScope 2202 provides the performance, features and
quality you would expect from a Pico oscilloscope, all at an affordable
price.
This inexpensive, dual channel, USB
oscilloscope uses the same powerful technology as the acclaimed
PicoScope 3000 series of
professional PC oscilloscopes. Using this latest technology Pico are
able to provide you with an oscilloscope with specifications not
previously available with scopes in this price range.
The PicoScope 2202 is ideally suited
for use by hobbyists and students, yet with its fast sampling rate it is
also powerful enough to be used by electronics technicians for
scientific, and general analog and digital circuitry.
- 2 Channels
- 20 MS/s sampling rate
- 2 MHz bandwidth
- 32 kB buffer memory
- No power supply required
- USB 2.0 connection for fast
screen updates
The PicoScope 2202 is suitable for use
on any laptop or desktop PC, with a USB port, running Microsoft Windows
98SE or above. Simply plug the PicoScope into the USB port, no power
supply is required, and the PicoScope is ready to use.
PicoScope oscilloscopes are supplied
with PicoScope software
that provides oscilloscope, spectrum analyzer and multimeter functions.
PicoScope software makes full use of your PC's processing capabilities
allowing you to view real-time signals, zoom in on your signal, and save
and print captured waveforms. Also supplied is PicoLog data acquisition
software that transforms your PC into a high-speed data logger.
With oscilloscope, spectrum analyzer
and data logger functions, all in an easy-to-use PC-based unit, the
PicoScope 2202 represents outstanding value for money and an inexpensive
solution to your test and measurement needs.
PicoScope 2202 Oscilloscope
Specifications
| |
PicoScope 2202 |
|
Bandwidth |
2
MHz |
Sampling rate
(single shot) |
20 MS/s (single channel)
10 MS/s (dual channel) |
|
Channels |
2 |
|
Dynamic range |
50 dB |
|
Buffer size |
32 kB |
|
Resolution |
8
bits |
|
Accuracy |
±3% |
|
Ranges |
±50 mV to ±20 V |
|
Input impedance |
1
MΩ |
|
Overload protection |
±100 V (signal input)
±50 V (between grounds) |
|
PC connection |
USB 2.0 (USB 1.1 compatible) |
|
Power supply |
from USB port |
|
Dimensions |
140 x 190 x 45 mm |
|
Supplied software |
PicoScope (oscilloscope, spectrum analyzer, meter)
PicoLog (data logger) |
|
PC requirements |
Microsoft Windows 98SE, ME, 2000 or XP operating system
CD-ROM drive (only required to install software)
USB port |
| |
|
Looking for a scope with better
specifications, see the
PicoScope 3000 series
Pico Scope Kits
|
Home
