ACCES now offers USB-based data acquisition and control in both standard packaging and embedded USB/104 board options. These external USB devices are perfect for applications requiring monitoring, control and industrial serial communications from any PC or laptop with a USB port. What makes our OEM board-only option unique is that its PCB size and mounting holes match the PC/104 form factor. Our USB/104 versions are excellent for installation into OEM equipment or adding I/O to an existing PC/104 stack. All of our products feature Plug-and-Play USB installation for quick connect or disconnect in mobile or stationary systems. All ACCES USB products are compatible with USB 2.0 and most fall into the highest-speed category of this specification. USB is easy to use and eliminates the labor required with traditional plug-in boards. Call us today and start your application tomorrow.
| MODEL | DESCRIPTION | RoHS | |
|---|---|---|---|
 |
USB-AI16-16A | 16-bit, 16-channel, 500kHz analog input module with 8 ranges and 16 bits of digital I/O and auto calibration | |
| USB-AI16-16E | 16-bit, 16-channel, 250kHz analog input module with 8 ranges and 16 bits of digital I/O and software calibration | ||
| USB-AI12-16A | 12-bit, 16-channel, 500kHz analog input module with 8 ranges and 16 bits of digital I/O and auto calibration | ||
| USB-AI12-16 | 12-bit, 16-channel, 250kHz analog input module with 8 ranges and 16 bits of digital I/O and software calibration | ||
| USB-AI12-16E | 12-bit, 16-channel, 100kHz analog input module with 8 ranges and 16 bits of digital I/O and software calibration | ||
| U-RA1216 | 12-bit 16-channel analog input module with 3 analog outputs and seven bits of digital I/O | ||
| U-RAD128 | Intelligent, eight channel, 12-bit, analog-to-digital converter unit | ||
| U-RIDACS | Remote Intelligent Data Acquisition and Control Systems for USB use | ||
 |
U-RDAG12-8 | Eight 12-bit D/A converters, with 3 voltage ranges and simultaneous 4-20mA current output. Seven bits of open collector I/O | |
| USB-DA12-8E | Eight 12-bit D/A converters, with 8 voltage ranges and simultaneous differential or single ended output. | ||
| USB-DA12-8A | Eight 12-bit D/A converters with full Arbitrary Waveform Generator functionality (AWG/ARB) up to 125 KSample/second simultaneously on eight channels. | ||
 |
USB-DIO-32 | USB digital input/output pod with 32 lines of digital I/O | |
| USB-DIO16-16A | 16 Digital inputs and 16 digital outputs at 12MHz (24MB/s) sustained throughput, or up to 132MB/s burst | ||
| USB-IIRO-4 | USB to 4 optically isolated digital inputs (AC or DC) and 4 electro mechanical relay outputs |
 |
|
| USB-IIRO-4DB | USB to 4 optically isolated digital inputs (AC or DC) and 4 electromechanical relay outputs with external DB25 connector |
|
|
| USB-IIRO4-2SM | USB to 4 optically isolated digital inputs (AC or DC), 4 electromechanical relay outputs, and 2 RS232/422/485 serial ports |
|
|
| USB-IIRO-8 | USB to 8 optically isolated digital inputs (AC or DC) and 8 electromechanical relay outputs |
|
|
| USB-II-16 | USB to 16 optically isolated digital inputs (AC or DC) |
|
|
| USB-RO-16 | USB to 16 electromechanical relay outputs |
|
|
| USB-IIRO-16 | USB to 16 optically isolated digital inputs (AC or DC) and 16 electromechanical relay outputs |
|
|
| U-RDI-54 | 54 digital inputs, allowing up to 50V signal levels | ||
| USB-CTR-15 | USB-based unit provides 15 digital counter/timers |
|
|
| USB-IDIO-16 | Isolated Input and Solid State Relay Output Digital I/O Modules |
|
|
 |
USB-232, USB-422 and USB-485 |
Single USB to RS-232, RS-422 or RS-485 serial port adapter |
|
| USB-COM-2SM | Two-port USB to serial RS-232/422/485 adapter |
|
|
| USB-COM232-4 | Four-port USB to serial RS-232 adapter | ||
| USB-COM-4S | Four-port USB to serial RS-422/485 adapter | ||
| USB-COM-4SM | Four-Port USB to Serial RS-232/422/485 adapter | ||
